Eleaf iStick 50 Watts Kit

After presenting the istick 20 watts and istick 30 Watts, Eleaf innovates and now offers its famous boxes in version 50 Watts.

Slightly larger than her little sister 30 watts, this mini box has 2 integrated batteries 2200 mah. So you will dispose of an incredible battery life with a capacity of 4400 mah.

With 2 arrow buttons, you can vary the wattage from 5 to 50 watts and voltage from 2 to 10 Volts.

The coils use range is between 0.2 and 5.0 Ohms allowing you to use your rebuildable atomizers (RBA), your drippers (RDA) and the new generation clearomizers (subtank).

For maximum security, Eleaf has equipped the istick 50 W with a temperature controller that allows the Mod to switch off for 5 seconds if the battery exceeds 70 ° C.

Like both other versions of the range, the istick 50 watts has a OLED screen indicating the voltage, power, resistance value and the charge level of the battery.

Fitted with a screw-type 510 and a spring loaded pin, it will adapt to all clearomizers available on our shop.

Like the other models, charging the istick 50W is by USB. It takes a cycle of about 4-5 hours to fully charge the battery. The feature « passthrough » allows you to charge your mod and still vape.

Composition of the complete Eleaf iStick 50 Watts kit

• 1 istick 50 W - 4400 mAh
• 1 adapter eGo / 510
• 1 USB Cable
• 1 wall plug
• 1 Manual
  
  

Technical features of iStick 30 W

• Brand: Eleaf
• Screen: OLED
• Dimensions: 83mm x 45mm x 23 mm
• Thread: eGo / 510
• Battery: 4400 mAh
• Variable Voltage: 2.0V - 10.0 V
• Variable Wattage: 5.0W - 50W
• Passthrough function (recharge via USB and keep vaping)
• Weight: 148 grams
• Supported Coils: 0.2 to 5.0 ohms
• Temperature Controller
• Protection against short circuits
• Protection against the aspirations of more than 10 seconds
  
  

User guide

1 - Using istick 50 watts

- To lock or unlock your istick 50 watts, you have to click quickly 5 times on the square button (switch).

- To switch between the setting of volts/watt and vice versa, simply click 3 times on the power button.

- When you increase or decrease your settings if you hold the arrow, incrementing become automatic. To return to a manual setting, press the arrow again.

2 - Maintenance

- When you receive your Mod, we advise you to fully charge before use. Subsequently, charge the battery when its level falls below 20%. A full charge cycle is about 5 hours.

- Occasionally, wipe the excess liquid you can find on the screw with a tissue or cloth.