Mod Innokin iTaste MVP 3.0 (30 watts)

It is a fact, Mod shaped boxes are one of the major trends in 2015 in the world of vape. Faced with competition which is fiercier and fiercer (SMOK Xpro M36, istick 30 Watts) Innokin strikes a blow by offering the MPV 3.0.

This mod will allow a setting between 6.0 and 30 watts in increments of 0.5 W or between 3-9 volts in increments of 0.1. It supports up to 0.4 Ohm coils (perfect for clearomizers new generations as subtank)

Innokin see it big with 3800 mah battery with a simply amazing autonomy. The Li-ion polymer battery is built into the box and can be recharged via a USB port. You can vape while charging your Mod.

Level finish, as always, Innokin is in the very high end. The body of MVP 3.0 is made of aluminum with small bumps that makes it very pleasant to the touch and less slippery. The button (switch) is placed on the side with the + and - buttons (unlike the previous version) which makes it very easy to use.

MVP 3.0 by Innokin has an OLED display clear and bright to display the value of the coil, wattage, voltage and battery charge. Innokin added a LED on top of the Mod to see the level of your battery without looking at the screen.

Another innovation from Innokin is the small cable included in the box that allows you to charge your mobile phone or any other accessory-loading micro USB.

For safety, the MVP 3.0 has multiple protections:

• Protection against short circuits
• Protection against the signal and battery discharge
• Protection against aspirations too long (10 seconds)
  
  

This mod will be perfect for those looking for durability, reliability and long battery life.

Composition of Innokin iTaste MVP 3.0

• 1 Innokin MVP 3.0 (30 Watts)
• 1 micro USB cable
• 1 adapter eGo / 510
• 1 Manual

MVP 3.0 Innokin features:

• Brand: Innokin
• Battery: 3800 mah (built-in)
• Variable Wattage: 6.0 - 30 W
• Variable Voltage: 3-9 V
• Supported Coils: minimum 0.4 Ohm
• Screen: OLED type
• Diameter: 23 mm
• Length: 102 mm
• Width: 46 mm
• Weight: 205 grams
• Materials: aluminum body / metal button
• Compatibility: Adapter eGo / 510
• Passthrough function
• Protections: short circuit, long breath, battery discharge
• Memory adjustment parameters (Volts and Watts)

User guide

MVP 3.0 Innokin is equipped with protection "click secure". To lock or unlock your Mod, click on the button 3 times (switch).

You can adjust watts and volts. To switch from one to the other, press the button (switch) and "+" or "-".

To increase or decrease the values, press the + or - button until the numbers on the screen flash (about 2 seconds). Thereafter, you can adjust the voltage or wattage to your preference.

You can rotate the display screen 180 degrees. To do this, press the + and - buttons simultaneously for a few seconds. Rapidly and simultaneously pressing the + and - you will get the number of puffs.

Under the Mod, you have a micro USB cable to charge your mobile phone (not iPhone compatible). No need to activate the Mod, you just have to connect your phone to charge.

The LED is located on the top of the Mod is a battery indicator (in addition to be on the screen).

• Green LED: charged between 80 and 100%
• Yellow LED: charged between 30 and 80%
• Red LED: charged between 10 and 30%

For durability, we recommend you to load your Mod completely before use (full charge cycle of about 4 hours).